I’m going to check it out again. It sounds more than decent for most things. Do you have any tutorials you learned from. The “learn fusion 360 in 30 days” is what I used to learn fusion
Not any that I found useful sadly :D, FreeCAD is mostly used by Engineers, so finding a coherent easy to understand tutorial isn’t easy. I got the gyst with trial and error and watching people use FreeCAD.
3 Lessions which makes FreeCAD flow make sense.
In Part Design a Sketch Lives within a Body, so you create Body then Sketch
The Sketches white lines needs to be complete, with no gaps. If you need to add structure (like adding a circle to a box), you can do so with construction geometry (blue lines)
When a line turns green (or construction turns light blue, it’s constrained. Meaning it won’t move.
For me this was what allowed me to understand how to use FreeCAD well enough to replace Fusion. Everything from what I’ve used thus far, is based on this hierarchy and order of operation.
That’s not true. FreeCAD can do those things just fine. In fact, I have been able to do every single thing in FreeCAD that I used to do in Fusion360. There is a learning curve, but FreeCAD is extremely capable.
The problem with FreeCAD is that the UI is abysmal. There is tons of duplicate functionality in different benches, but if you start in one you might discover that it doesn’t have what you need and have to start over in another.
And that probably won’t be the end.
Very happy (and after 2 years usage still extremely unskilled) with FreeCad.
Freecad not free as. Autocorrect got me again
Is free as a good enough replacement? I like fusion for the sculpting mode as well. I would rather go to an open source replacement though
Not sure about sculpting, but in terms of sketching I find it good but flawed.
Getting to grips with sketching and how you need to complete shapes, and using support lines is a learning curve.
However I find it quite rewarding and worth the time to learn.
I’m going to check it out again. It sounds more than decent for most things. Do you have any tutorials you learned from. The “learn fusion 360 in 30 days” is what I used to learn fusion
Not any that I found useful sadly :D, FreeCAD is mostly used by Engineers, so finding a coherent easy to understand tutorial isn’t easy. I got the gyst with trial and error and watching people use FreeCAD.
3 Lessions which makes FreeCAD flow make sense.
For me this was what allowed me to understand how to use FreeCAD well enough to replace Fusion. Everything from what I’ve used thus far, is based on this hierarchy and order of operation.
Thank you that helps
thanks!
FreeCAD is pretty much useless, it still doesn’t have basic modelling features like fillets, chamfers, etc.
That’s not true. FreeCAD can do those things just fine. In fact, I have been able to do every single thing in FreeCAD that I used to do in Fusion360. There is a learning curve, but FreeCAD is extremely capable.
The problem with FreeCAD is that the UI is abysmal. There is tons of duplicate functionality in different benches, but if you start in one you might discover that it doesn’t have what you need and have to start over in another.
Can you apply them to your drawings/sketches?
This isn’t true? Fillets and chamfers are available in the PartDesign workbench.
Can you apply them to your drawings/sketches?
I’m not sure about chamfer (I haven’t used it in my sketches) but fillet is definitely included in the Sketcher workbench.
Must be a new feature, good to know.