Here is a comparison between an old benchy done with my Ender-3 and three with the SV-08

Thanks for the lead! That might be it, I saw a big blob of goop leaking from it the first time I heated it. I’ll rebuild the hotend when I have time. There an extra nozzle in the kit.

Edit:

Here is a comparison between an old benchy done with my Ender-3 and three with the SV-08. The surface finish with the Ender 3 is much more consistent and the PETG is a lot shinier. Maybe speed is a factor too. Shoud I try and slow the SV08 down a notch?

Nice cheat sheet!

Weirdly enough, I printed at 235 thinking the nozzle was too hot and it was worse. At 245 more issues seem to disappear except less than ideal overhangs.

Sure you’re absolutely free to do as you please ;)

From personal experience tho, anything connected to the TV should Just Work^TM. Nothing more frustrating than just wanting to watch an episode or play a quick game before going to bed and having to spend this time doing updates and maintenance instead.

As this is for a HTPC, I would rather go for uBlue Bazzite instead of Nobara. Same Fedora base, super gaming oriented too, but atomic/immutable so 0 maintenance.

Plus, uBlue projects are not distros but an alternative build pipeline system for Fedora Atomic projects. That means that the projects scope is tiny and much easier to maintain, and that the real distro maintainers are still the Fedora team. From a user perspective, it’s much better in the long term than a single-person effort like Nobara.

Installing Fedora. I had almost nothing to configure, it worked out of the box. How frustrating! I had the whole day planned and now what? Enjoy my free time like a pleb !?!

(/s just in case anyone was wondering)

I’m a pepperhead myself but my wife has a very low tolerance so I tend to cook mildly hot meals at best and add heat in my own plate. I have a fridge rack full of hot sauces.

One of my favorite dishes to unleash the hot sauce collection is homemade tacos (disclaimer, I’m not Mexican):

• Guacamole for freshness and acidity (avocado, lime juice, chopped coriander, shallots, tabasco sauce, cumin powder, salt)
• Elote-style sauce for richness and creaminess (50/50 mayo and heavy cream, grated garlic, chopped coriander, crumbled feta, pimienton de la Vera, corn (grilled fresh is better, canned is fine))
• Grilled/braised protein and veggies for earthiness, umami and heat (chicken, onions, red peppers, cumin powder, coriander seeds powder, all the peppers you want, it works great with earthy or smoky peppers like ancho, chipotle, pimienton de la Vera, habanero etc.)
• Pico de gallo for added freshness (chopped onion, chopped coriander, chopped tomato, lime juice)
• Pickled jalapenos for acidity and heat

Put everything in the middle of the table with tortillas and have fun. It seems like a lot of stuff to do but good prep makes it easy and streamlined as a lot of ingredients are shared or similar. Every preparation is super flavorful by itself but really shines with hot sauces as you can tune brightness, earthiness and heat in each mouthful.

~~Makes sense, I think most users I’ve seen are french speakers. Which org? ~~

Edit: nvm I found them, it’s Les Soulèvements de la Terre. Thank you!

There are two types of scrum masters. Those who are true believers in agility, and those who think it’s just a fancy bullshit name for “project manager”. The latter tend to be the the fucking worst, unfortunately they’re the most common breed.

Truth is, a real “scrum master” (or “agile coach” for SAFe 6 people) is at best a part time job, and has only two purposes. With experience and knowledge, help the team towards making their job easier/faster/more interesting/more predictable/more serene through continuous improvement using agile methods as a toolbox (and NOT a fucking dogma), and tell idiotic managers who can’t fucking anticipate a fucking deadline more than 3 days in advance to fuck off and stop being fucking morons teach managers to respect agile principles and have a clear short- and medium-term vision so their needs can comfortably fit the team’s backlog without jeopardizing the team, other priorities or the deadlines.

The other breed are fucking corporate yes-men who shove work over capacity onto the team and play make-believe-scrum by focusing exclusively on bullshit rituals that serve no actual fucking purpose.

On my previous laptop, the trackpad had a bug that made it spam interrupts after waking up from sleep. It ruined battery life and basically kept one core at 100% permanently.

So I duct-taped a systemd script that unbound and bound the trackpad after each wake up.

#!/bin/sh
case "$1" in
        post)
                echo -n "i2c_designware.0" > /sys/bus/platform/drivers/i2c_designware/unbind
                echo -n "i2c_designware.0" > /sys/bus/platform/drivers/i2c_designware/bind
        ;;
esac

Wait, it didn’t work? I use Apple Maps all the time in DDG

I think Ubuntu was relevant 15 years ago, when Linux was scary. Nowadays, it’s neither easier to install nor to use than, say, Fedora for example. I’d even say any current distro with a live CD and a graphical installer is easier to install than Ubuntu 15 years ago.

The fact that Canonical has successfully commercialised Linux doesn’t always sit well with some people in the spirit of FOSS Linux, but they have also done a great deal to widen the distribution and appeal of Linux.

I agree with the second part but not the first. Linux would be nowhere near what it is today without some serious corporate investments, so commercial Linux is a good thing (or a necessary evil depending on your POV). The largest kernel contributors are large IT and hardware companies, after all.

What’s bad about Ubuntu is that the “free” version is an inferior product, like a shareware of old. The biggest commercial competitors like SLES or RHEL are downstream from excellent community distros (OpenSuse and Fedora, respectively).

The community support, forums and official documentation are most useful. I don’t currently use Ubuntu, but use their resources frequently.

Fortunately that knowledge can be used downstream and often upstream too. After all, most Ubuntu issues are Debian Sid issues.

Happens to everything that becomes a commodity.

But Model Ms and Model Fs are still in production, and the MK ecosystem has never been so vibrant

Please, I do need this recipe. For reasons.

Thanks for the feedback!

I’m pretty happy with the transparencies tbh. Although on mine, there seems to be two sides, one that gives a fuzzy dirty effect with a lot of stray toner around the actual print (looks like static), and the other side that gives perfectly crisp prints. Unfortunately I can’t really tell the sides apart.

Apart from that small speck of dust that prevented the transfer at the top left of the logo, the sheet came out perfectly clean, the totality of the toner was transferred to the dial. For PCB transfers where you could probably keep the sheet intact (I had to cut mine to fit between the applied indices), that would also mean the sheet would be almost indefinitely reusable.

If you can clamp a whole PCB on the bed, that’s a perfect application ;)

Ah perfect timing indeed.

The key takeaway indeed matches yours: it’s not a Voron despite being heavily inspired by it, there are some annoyances but at this price point it’s forgivable and most of them seem to have workarounds (someone in the comments suggested letting the machine fully soak heat before performing Z-offset calibration), the open-source nature might bring a lot of third-party upgrades in the future.

Also, the reviewer’s unit has some abnormal wear on the belts. Does it match your experience?

All in all, it seems to be a decent budget CoreXY printer with a very large volume at 1/3 the price of an LDO Voron kit + PIF parts, with a much quicker assembly but some potential pitfalls.

If this eventually becomes the Ender 3 of CoreXY printers that can be frankensteined into a a much higher quality printer over time, I’m all for it.

Than you so much for such a detailed analysis!

For reference, I’ve had a (heavily modded) Creality Ender 3 V2 for a few years, and I’ve hit a limit in terms of speed and quality.

The filament path between the extruder and hotend is poorly-constrained, making it a pain to load The auto-z calibration is often just a smidge off It uses a custom nozzle/heater

If it’s possible to install a Stealthburner instead of the standard extruder/hotend combo, it might solve most of these issues. Maybe some people are working on a V6 or Mk8 style hotend (I have a metric fuckton of Mk8 nozzles laying around)…

The fans are absurdly loud. All of them.

OK Noctua upgrades then. Compared to an already absurdly loud Ender 3, is it worse?

The mainboard is effectively a BTT CB1 and Fystec Cheetah on a single board Their software customizations are of dubious quality

Would a Voron-style mainboard + RPi + standard Klipper solve these issues or are there fundamental incompatibilities?

Thanks!

Ubuntu’s version of Gnome is heavily modified to look and feel like their old Unity DE though. Vanilla Gnome like in Fedora or Arch is a vastly different experience.

Most proper denim pants are sized in inches, even from non-US countries.

But of course vanity sizing is a thing so a size 36 is closer to 38in unless explicitly specified, and most online retailers provide true sizing in cm anyway, so there’s that.