That’s because the batteries have become the printer ink of the tool world. They’re f’n expensive.
If you buy into a product system it makes no sense to have different batteries that don’t fit all the tools. If you keep the batteries all the same then you can be charging one or two sets vs having to buy extra sets and charger multiplied by the different tool makers.
I have one of the manufacturers shown in the image, and after I got a kit that had a charger, tool, and extra batteries included I got hooked in because they sell tools without batteries, but I have extra! So I bought same maker. The tools are all pretty good, so not much difference between makers, but that’s one way they hook you.
The batteries are actually really simple. The best thing you can do to increase efficiency and save money is learn to replace the cells. You can get higher quality lithium cells than the batteries come with if they start to fail for way cheaper than you’d expect. The boards have like 12 circuits, and if you can’t fix them you can buy them for a few bucks.
I’ve done that on older battery packs. It’s a PITA because many packs are sealed, not screwed together, and you have to physically cut them apart to get to the batteries within for replacement. And assemble the batteries, which are often soldered in order. Then you gotta figure out how to reassemble the whole thing in a way that it won’t crack apart again. Doable, but definitely not for everyone.
This is the way and how they get everyone hooked. My husband was -this close- to buying a badly reviewed lawn mower all because he had 3 batteries from the same brand. Two hardware store employees talked him out of it even though it meant my husband walked away with a cheaper brand, bless them.
That’s because the batteries have become the printer ink of the tool world. They’re f’n expensive.
If you buy into a product system it makes no sense to have different batteries that don’t fit all the tools. If you keep the batteries all the same then you can be charging one or two sets vs having to buy extra sets and charger multiplied by the different tool makers.
I have one of the manufacturers shown in the image, and after I got a kit that had a charger, tool, and extra batteries included I got hooked in because they sell tools without batteries, but I have extra! So I bought same maker. The tools are all pretty good, so not much difference between makers, but that’s one way they hook you.
The batteries are actually really simple. The best thing you can do to increase efficiency and save money is learn to replace the cells. You can get higher quality lithium cells than the batteries come with if they start to fail for way cheaper than you’d expect. The boards have like 12 circuits, and if you can’t fix them you can buy them for a few bucks.
As long as they didn’t design the BMS to brick itself when you disconnect the cells, like future motion did with the One Wheel, allegedly.
https://youtu.be/6G3ddOMvBws?si=omUTE32w0fIITED4
I’ve done that on older battery packs. It’s a PITA because many packs are sealed, not screwed together, and you have to physically cut them apart to get to the batteries within for replacement. And assemble the batteries, which are often soldered in order. Then you gotta figure out how to reassemble the whole thing in a way that it won’t crack apart again. Doable, but definitely not for everyone.
Ridgid tools has a lifetime warranty, and that extends to batteries!
This is the way and how they get everyone hooked. My husband was -this close- to buying a badly reviewed lawn mower all because he had 3 batteries from the same brand. Two hardware store employees talked him out of it even though it meant my husband walked away with a cheaper brand, bless them.
Good to hear there’s honest people out there, and your husband listened to them, even if it means taking the hit on battery convenience.