I have a Nevermore filter with 24v fans, would it be fine to connect them to the parts that I have circled on my Prusa MK4?

Or is that dangerous?

  • FuglyDuck@lemmy.worldEnglish
    2·
    2 years ago

    If the charger is a 24v powesupply, that would work. I would also suggest getting a switch to put in line so you don’t have to keep unplugging it- either a rocker switch or mini toggle.

    • chrischryse@lemmy.worldOPEnglish
      1·
      2 years ago

      Not sure how familiar you are with electronic stuff, but the fans I have are 24v and 0.1A my laptop charger outputs up to 6A that shouldn’t be an issue right?

      • FuglyDuck@lemmy.worldEnglish
        1·
        2 years ago

        Volts need to match, nominally.

        Your fans will only draw .1A from the supply- as long as your supply has enough amperage to supply everything running… your fine.

          • FuglyDuck@lemmy.worldEnglish
            1·
            2 years ago

            19 is probably fine. Voltage is always a bit inconsistent so the phrase they use is “nominal”- or “more or less”