Ill try this, but i also cannot boot into Mint which is what i have on my usb. Also i didnt installed zorin bur rather just added the harddrive from another pc for use and forgot to format it, ive been using ot for a while like this,l. Do you think this os still my issue?

Hey, I replaced the cable and everything seems to be working fine, thank you!

It’s a bit long but here it is.

smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.7.11-200.fc39.x86_64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Toshiba X300
Device Model:     TOSHIBA HDWE140
Serial Number:    41IUK67JFBRG
LU WWN Device Id: 5 000039 abc58066c
Firmware Version: FP1R
User Capacity:    4,000,787,030,016 bytes [4.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database 7.3/5528
ATA Version is:   ATA8-ACS (minor revision not indicated)
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 1.5 Gb/s)
Local Time is:    Sat Apr 13 17:09:03 2024 -03
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x80)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(  120) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 ( 481) minutes.
SCT capabilities: 	       (0x003d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   050    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0005   100   100   050    Pre-fail  Offline      -       0
  3 Spin_Up_Time            0x0027   100   100   001    Pre-fail  Always       -       464
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       11263
  5 Reallocated_Sector_Ct   0x0033   100   100   050    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000b   100   100   050    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0005   100   100   050    Pre-fail  Offline      -       0
  9 Power_On_Hours          0x0032   073   073   000    Old_age   Always       -       11051
 10 Spin_Retry_Count        0x0033   253   100   030    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       11259
191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       8
192 Power-Off_Retract_Count 0x0032   083   083   000    Old_age   Always       -       8637
193 Load_Cycle_Count        0x0032   099   099   000    Old_age   Always       -       11332
194 Temperature_Celsius     0x0022   100   100   000    Old_age   Always       -       38 (Min/Max 16/59)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   253   000    Old_age   Always       -       0
220 Disk_Shift              0x0002   100   100   000    Old_age   Always       -       0
222 Loaded_Hours            0x0032   073   073   000    Old_age   Always       -       11003
223 Load_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
224 Load_Friction           0x0022   100   100   000    Old_age   Always       -       0
226 Load-in_Time            0x0026   100   100   000    Old_age   Always       -       545
240 Head_Flying_Hours       0x0001   100   100   001    Pre-fail  Offline      -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

The above only provides legacy SMART information - try 'smartctl -x' for more

death to the us fascist empire

>Literally State planning, free market
>dictatorship

Yeah, I can see why the US is falling to pieces.

You still need a terminal emulator capable of displaying images, though, right? Like Kitty, Allacrity won’t do the trick.

Is there a public deployment of it?

ASUSTeK COMPUTER INC. P8H61-M LX3 R2.0 Intel i3-3220 (4) @ 3.300GHz NVIDIA GeForce GT 640 Rev. 2

That’s my hardware

I honestly rather not install nouveau since iknow it can cause issues and i wouldnt mind installing nvidias proprietary drivers if it makes it work since its not even for me

do you know if i should install the 470xx or the one just called nvidia drivers in the app store?

ill give it a try to the rest tho, thanks!

I think I maybe phrased it horribly, my question was more like, what do I need to learn in order to modify myself the .bashrc by myself instead of using a programme. Does it make sense?

I was trying to do that but I’m unsure what to edit to do that, since most tutorials are using either a Debian based or Arch distro.

I was using a similar guide, and it also talked about the locale.gen, but that file was never to be found, I just searched a bit more into that and this popped up. So it seems Fedora handles things differently, but now I’m unsure what commands to execute since I’m not sure the ones in that thread are also valid for me.

I was using a similar guide, and it also talked about the locale.gen, but that file was never to be found, I just searched a bit more into that and this popped up. So it seems Fedora handles things differently, but now I’m unsure what commands to execute since I’m not sure the ones in that thread are also valid for me.

Bring Six-Axis now /s

Well, suppossedly what they would offer doesn’t seem to change things much:

Future Pricing Plans

We have a few product ideas we have experimented with that would be paid add-ons to the current service: collaborative tools, AI integration, translation tools, and premium text to speech voices. Of these features, the premium text to speech voices are the only one that are currently available in the app, as part of our “ultra realistic voices” beta.

https://docs.omnivore.app/about/pricing.html

Really cool, would you ever consider contributing to their extension and adding that feature to theirs?

Yes, because the US has never been involved in imperialism in Latinamerica, this has to be fake because US good.

I will try to remember this in 6 months.

Poor isn’trael settlers.

We don’t need your help, when you get rid of your imperialistic attitudes and your support for class oppression we can start the friendliness, until then, you are but a bunch of hypocrites.

Do you think we haven’t tried doing this? Have you even read anything about Latinamerican history? How do you want us to do that if we get fascists regimes every 5 fucking years? How do you build anything if you are debt trapped? Don’t fucking come with some shit about China doing the same, they are sending fucking money for infrastructure, which is a lot fucking better that whatever the people you support have done, let us do how we please and go and be butthurt somewhere else that we choose to align with whomever we want. If you fuck us up don’t cry that you end up isolated in geopolitics.

The institutions with broad popular support, not neoliberal right wing pro us imperialism shit, support China, so yeah, don’t come telling me about what we should do. We have massive inflation because of International Mother Fuckers IMF and coups and right wing neoliberals financed by the US and you think we need some sort of thingy to protect us from China? We welcome them as our brothers with open arms.

I fucking love sparkling water.