“Starry night” on one side, “the scream” on the other. But only if you can get the number plate “Van Go”.

Is that different from this one I remember watching years ago? https://youtu.be/OZzIvl1tbPo

Note I’m not really… Good at math nor really understand it.

I’ll still watch an entertainer and someone good at what they do for entertainment either way.

If you didn’t learn it only for this project, that cost is already sunk regardless.

Either way the post itself contains the answer for those who haven’t already sunk that cost.

I’m far from an expert sorry, but my experience is so far so good (literally wizard configured in proxmox set and forget) even during a single disk lost. Performance for vm disks was great.

I can’t see why regular file would be any different.

I have 3 disks, one on each host, with ceph handling 2 copies (tolerant to 1 disk loss) distributed across them. That’s practically what I think you’re after.

I’m not sure about seeing the file system while all the hosts are all offline, but if you’ve got any one system with a valid copy online you should be able to see. I do. But my emphasis is generally get the host back online.

I’m not 100% sure what you’re trying to do but a mix of ceph as storage remote plus something like syncthing on a endpoint to send stuff to it might work? Syncthing might just work without ceph.

I also run zfs on an 8 disk nas that’s my primary storage with shares for my docker to send stuff, and media server to get it off. That’s just truenas scale. That way it handles data similarly. Zfs is also very good, but until scale came out, it wasn’t really possible to have the “add a compute node to expand your storage pool” which is how I want my vm hosts. Zfs scale looks way harder than ceph.

Not sure if any of that is helpful for your case but I recommend trying something if you’ve got spare hardware, and see how it goes on dummy data, then blow it away try something else. See how it acts when you take a machine offline. When you know what you want, do a final blow away and implement it with the way you learned to do it best.

3x Intel NUC 6th gen i5 (2 cores) 32gb RAM. Proxmox cluster with ceph.

I just ignored the limitation and tried with a single sodim of 32gb once (out of a laptop) and it worked fine, but just backed to 2x16gb dimms since the limit was still 2core of CPU. Lol.

Running that cluster 7 or so years now since I bought them new.

I suggest only running off shit tier since three nodes gives redundancy and enough performance. I’ve run entire proof of concepts for clients off them. Dual domain controllers and FC Rd gateway broker session hosts fxlogic etc. Back when Ms only just bought that tech. Meanwhile my home “ARR” just plugs on in docker containers. Even my opnsense router is virtual running on them. Just get a proper managed switch and take in the internet onto a vlan into the guest vm on a separate virtual NIC.

Point is, it’s still capable today.

I’m in Australia, generally, we have cooking instructions and microwaves that talk about wattage and time. Never duty cycle.

Eg a sauce packet says 600w 30sec. Press power button until 600w and put it in 30 seconds.

I know there’s duty cycles, you can hear them. I don’t know if that’s how it’s converted as a fraction of the 1500 watt maximum (40% duty cycle = 600w) but you hear it turn on and off most on the defrosting preconfigured buttons.

Either way, I wouldn’t be surprised if it’s all just the same underneath with regional translations.

Ah sounds like two compounding issues then! I referenced this issue https://www.sleepyponylabs.com/blog/pl2303 since so many cables I had previously, even from the router and switch maker that came with the device, stopped working.

Great to know that there’s a whole other bunch of issues around these cables further making life tough for consumers.

Those cables more than likely were using clone chips and for whatever reason Microsoft decided to back completely banning them when identified.

You’ll probably know if your old one is a fake chip because it’ll say “not a prolific…” which isn’t just a reboot and edit to allow unsigned drivers, it’s dead.

What’s worse, it’s absolutely impossible to tell if the cable you bought has the fake chip since legitimate stores and legitimate cable makers bought them so the loser is people.

Works fine on Mac and Linux though. Naturally.