Have you tried increasing your first layer extrusion width? A wider first layer will squish the filament into the build plate more, which might help. I use a 140% first layer width.

I’ve been using FolderSync. It let’s you sync to/from a remote server through a bunch of different protocols like SMB, SFTP, and WebDAV. You can schedule it to run automatically.

I haven’t tried it myself, but I think there is a way you can get Tasker to run scripts in Termux. You could set up your own rsync scripts that way.

If you’re worried enough to encrypt the drive, you shouldn’t be auto mounting it.

This really depends on your threat model. If you are only concerned about the drive getting stolen, or wanting to keep the data on it private if you need to RMA the drive, mounting it automatically on boot with a key stored on the rootfs can be perfectly fine. If you are a journalist in a hostile country and protecting your sources from state level actors is a matter of life and death, then yeah, this would be woefully insufficient.

It can be. Some of those keys might just taking advantage of regional pricing to buy keys in cheaper markets and resell them elsewhere, but some of them are purchased using stolen credit cards. Those actually cost the devs money from chargeback fees once the actually owner of the credit cards finds the fraudulent transactions. It’s hard to say how many of them are from stolen credit cards, and key-resellers try to stop it, but it still happens. This was back in 2019, but the Factorio devs had a couple blog posts talking about G2A:

Blog post saying G2A is worse than piracy

Follow up blog post where G2A reimburses them (at very bottom)

Apparently Framework did try to get AMD to use LPCAMM, but it just didn’t work from a signal integrity standpoint at the kind of speeds they need to run the memory at.

What filesystem are you using on the external drive? If it is NTFS or FAT, they won’t store permissions on the filesystem, which would explain why the owner/group changes are not persistent. To fix that, you can set the uid/gid on mount in your fstab.

/dev/mapper/YOUR_DRIVE /path/to/mnt <fstype> rw,uid=<jellyfin_uid>,gid=<jellyfin_gid>,dmask=0002,fmask=0113

Are you using the default bridge? I have a similar setup (with Traefik instead of NPM), and for each compose file am using separate networks for the internet, proxy, and backend services.

services:
  some_service:
    ...
    networks:
      - frontend_network
      - proxy_network
      - backend_network
  backend_service:
    ...
    networks:
      - backend_network
networks:
  frontend_network:
    driver: "bridge"
  proxy_network:
    driver: "bridge"
    internal: true
  backend_network:
    driver: "bridge"
    internal: true

Then Linus responded pretty poorly (and ended up stepping down as CEO and is now a chief creative something or other iirc)

Linus didn’t step down in response to this. I don’t remember the exact timelines, but he either stepped down before this, or was in already in the process of transitioning to the new CEO when this happened.

It’s been a while since I took statistics, but yes, I guess that is a binomial distribution. It does not influence the results in the way you are implying it does, though. The calculator does actually account for it (the Population Proportion input), and the sample size actually decreases the lower/higher your proportion is. My point was that a question like, “Do you watch anime weekly,” is not like a question like, “How many hours of anime do you watch in a week,” where you certainly couldn’t assume a normal distribution for the number of hours watched.

Normal distribution with regards to what? “Do you watch anime weekly” is a binary question. There really isn’t a distribution associated with that.

You don’t need a massive sample size for surveys to give meaningful information. Play around with this sample size calculator if you want to see what the margins of error are: https://www.calculator.net/sample-size-calculator.html?type=2&cl2=95&ss2=4000&pc2=5&ps2=500000000&x=Calculate

• SLC -> Single-Level Cell, i.e. 1 bit per cell
• MLC -> Multi-Level Cell, i.e. 2 bits per cell
• TLC -> Triple-Level Cell, i.e. 3 bits per cell
• QLC -> Quad-Level Cell, i.e. 4 bits per cell

The more bits per cell you store, the more dense and therefore cheaper your flash chips can be for a give capacity. The downside is that it is slower and less reliable since you have to be able to write and read exponentially more voltage states per cell, e.g. 2 states for SLC, 4 states for MLC, 8 states for TLC, etc.

The Trine series is pretty fun. It’s a 2.5d puzzle platformer game. There are some combat bits, but most of the game is puzzles. I’d recommend the second one.

He killed four of his classmates and wounded seven others. 15 years old is old enough to know how terrible the impact of his actions would be. There is certainly more that we as a society could have done to help him with his mental illness, but that does not erase his agency and make him not responsible for his crimes. He has more than earned his punishment.