Kira doesn’t care about regulations

Ahh, the maps were so good. I remember using the extremely detailed hand drawn map to help me locate the Cavern of the Incarnate, and other cool locations. I am sad that I didn’t keep them.

I loved reading through the manual for Morrowind with the copy we got on the original XBox. I read all the class descriptions, details about the schools of magic, and had a whole character planned out before starting the game. I didn’t get into tabletop gaming until much later, but looking back, that manual really captured the same feeling of reading through the D&D players handbook and picking out a race, class, background, etc.

I think that feeling is why it’s still my favorite PC game.

I got the EIBOS one on Amazon. Not sure it is that different from the Sunlu and others that have been mentioned but it works fine for me. I had a very humid house, lile 60%+ in the summer. I had a lot of problems with petg and even pla before I got that box and none after. We just moved and new house is thankfully normal humidity, but I’m still using it

Draw is great, and I’ve been able to use it for most of what I used Acrobat for before, but it has issues with converting certain documents, especially when they have special fonts. Also there’s the issue of not being able to just fill out some fields and then share it back as a PDF

I’m not opposed to paying for software, especially if it’s good. I’ll try that out and see how it is. Thanks!

Similar situation here. I was raised home schooled for all of my education. Got a GED, good score on the ACT, got a 4.0 in the community college where I got an associates degree. The problem is parents who homeschool because they don’t want their kids to turn “woke” or be “converted” by exposure to the fact that non-straight, non-cis people exist. A lot of the time, the emphasis is only on indoctrination, and there is little or no actual education involved.

I have been to homeschool conferences - there are some good resources there, and a LOT of really pretty awful stuff like this article mentioned. People like the author are so incredibly impactful, even if they don’t realize it. They may never see results but those seeds matter. Even if the parents don’t get it, the kids will.

At a conference last year, there was a speaker talking about parenting difficult children (Kirk Martin with Celebrate Calm). He was presenting very much a solid gentle parenting approach (though he didn’t call it that) that is very contrary to the culture of a lot of homeschool groups. He spent a lot of time unpacking his experiences as someone who grew up with really strict physical discipline, the impact it had on him, his experience being a parent - kind of leading people on a journey from where they might be to where they should be as parents.

He also spent a bit of his talk on how the Bible doesn’t teach us to raise our kids to fight in a culture war and just really pretty clearly calling out a lot of the toxic far right christian-nationalist talking points. Sure he made a lot of people uncomfortable, but those thoughts will stick with them.

After his talk he was spent over an hour talking with people outside of the conference room answering questions. His next talk was packed as well.

Anyway, all that to say - I know it can take a lot out of someone to deal with people in those environments, but it is absolutely impactful and so desperately needed.

I have issues with FireFox running YouTube on windows 10 - it gets super laggy - the issue is nonexistent if I used the Piped frontend. I think it depends a lot on what website you are using - some don’t play well with FireFox.

That being said, I did not have issues with FireFox on Mac when I used that, or on Linux, though I don’t use my Linux laptop a lot for web heavy stuff

I use Cura 5.4 and the only changes I made were to the start and end gcode for the machine (per the guild I linked). After that, I did a few prints with my regular profiles, then started cranking up the speed a little at a time. So really the only setting I changed was the print speed and start / end gcode.

The printer handled everything else - honestly it feels a little like magic to me, even though it’s just software. I’m a software engineer so I feel like I should have a better grasp of it, but printer firmware is pretty far outside of the type of work I do. One thing I do know is that Klipper manages acceleration itself and doesn’t use the acceleration gcodes sent from the slicer - those get ignored and Klipper decides how fast to accelerate (this is configurable using moonraker or the config files).

I think the thing that makes the most difference in letting you print at higher speeds is the input shaping. I don’t understand all the inner workings, but it using the processing power on the raspberry pi to compensate for the vibration of the printer, letting you print much faster without getting artifacts in the print that affect quality. Here is some info on that

I’m sure there are a lot of slicer and Klipper configurations that I can do to improve things even more as well

How’s the performance / system requirements compared to Debian 12 with xfce? I’m on pretty old hardware and lower system requirements was why I installed Debian over Ubuntu. I don’t see CPU mentioned in the requirements on that link, just RAM and disk space

Thank you for the help @[email protected] @[email protected] - I believe the issue with the audio is hardware related. I reinstalled Mac OSX using the built in recovery tool and that does not detect the sound card either. So sometime in between it being used last and me installing Ubuntu on it the hardware failed. I don’t think I will bother replacing the logic board as it is a 10 year old laptop and is otherwise working just fine.

Regardless, it’s good to be using Linux again!

Didn’t have any luck setting the model - I read through those doc pages you linked and a lot of it is over my head but I think I was able to learn a few things.

At this point - I am not seeing any of the errors mentioned anywhere - I only see HDMI audio as the only card and that is displaying no errors (this laptop doesn’t have an HDMI port, only thunderbolt, and I don’t have a cable or adapter to even test if that audio is working on an external monitor) I’m not sure if Linux is incorrectly reading the internal sound card as the HDMI output, if it’s all on the same card and the internal output is not being read, or if the internal sound card is just totally not working (hardware issue) - To my knowledge there was no issue with audio on Mac OSX but this laptop hasn’t been used in a while.

I really appreciate your time and if you want to continue helping I will put more info below, but I also understand if you don’t want to think about it anymore 😄

I didn’t see any of the errors mentioned on those pages when checking dmesg (assuming that is where they would be) - I read through all the errors, nothing related to sound that I could tell, and used grep to pull out the messages containing references to snd or audio, etc:

[   10.711044] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   12.579602] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14
[   12.605430] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15
[   12.605925] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16

If you want I can put the whole dmesg here but it is a lot of text.

I also ran lsmod |grep 'snd' after the changes and the result is exactly the same before any changes and after each change:

snd_hda_codec_hdmi     94208  1
snd_hda_intel          61440  1
snd_intel_dspcfg       36864  1 snd_hda_intel
snd_intel_sdw_acpi     20480  1 snd_intel_dspcfg
snd_hda_codec         204800  2 snd_hda_codec_hdmi,snd_hda_intel
snd_hda_core          135168  3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec
snd_hwdep              20480  1 snd_hda_codec
snd_pcm               192512  4 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hda_core
snd_seq_midi           20480  0
snd_seq_midi_event     16384  1 snd_seq_midi
snd_rawmidi            53248  1 snd_seq_midi
snd_seq                94208  2 snd_seq_midi,snd_seq_midi_event
snd_seq_device         16384  3 snd_seq,snd_seq_midi,snd_rawmidi
snd_timer              49152  2 snd_seq,snd_pcm
snd                   135168  11 snd_seq,snd_seq_device,snd_hda_codec_hdmi,snd_hwdep,snd_hda_intel,snd_hda_codec,snd_timer,snd_pcm,snd_rawmidi
soundcore              16384  1 snd

And here is the most recent pacmd list-cards output:

1 card(s) available.
    index: 0
	name: 
	driver: 
	owner module: 7
	properties:
		alsa.card = "0"
		alsa.card_name = "HDA Intel HDMI"
		alsa.long_card_name = "HDA Intel HDMI at 0xb0a10000 irq 73"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:03.0"
		sysfs.path = "/devices/pci0000:00/0000:00:03.0/sound/card0"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "0a0c"
		device.product.name = "Haswell-ULT HD Audio Controller"
		device.form_factor = "internal"
		device.string = "0"
		device.description = "Built-in Audio"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	profiles:
		output:hdmi-stereo: Digital Stereo (HDMI) Output (priority 5900, available: no)
		output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (priority 800, available: no)
		output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output (priority 800, available: no)
		output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (priority 5700, available: no)
		output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI 2) Output (priority 600, available: no)
		output:hdmi-surround71-extra1: Digital Surround 7.1 (HDMI 2) Output (priority 600, available: no)
		output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (priority 5700, available: no)
		output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) Output (priority 600, available: no)
		output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) Output (priority 600, available: no)
		off: Off (priority 0, available: unknown)
	active profile: 
	ports:
		hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "video-display"
		hdmi-output-1: HDMI / DisplayPort 2 (priority 5800, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "video-display"
		hdmi-output-2: HDMI / DisplayPort 3 (priority 5700, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "video-display"

Here are some screenshots of pavucontrol and alsamixer: https://imgur.com/a/W4mURaW

Also FWIW here is the alsa-base.conf:

# autoloader aliases
install sound-slot-0 /sbin/modprobe snd-card-0
install sound-slot-1 /sbin/modprobe snd-card-1
install sound-slot-2 /sbin/modprobe snd-card-2
install sound-slot-3 /sbin/modprobe snd-card-3
install sound-slot-4 /sbin/modprobe snd-card-4
install sound-slot-5 /sbin/modprobe snd-card-5
install sound-slot-6 /sbin/modprobe snd-card-6
install sound-slot-7 /sbin/modprobe snd-card-7

# Cause optional modules to be loaded above generic modules
install snd /sbin/modprobe --ignore-install snd $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-ioctl32 ; /sbin/modprobe --quiet --use-blacklist snd-seq ; }
#
# Workaround at bug #499695 (reverted in Ubuntu see LP #319505)
install snd-pcm /sbin/modprobe --ignore-install snd-pcm $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-pcm-oss ; : ; }
install snd-mixer /sbin/modprobe --ignore-install snd-mixer $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-mixer-oss ; : ; }
install snd-seq /sbin/modprobe --ignore-install snd-seq $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; /sbin/modprobe --quiet --use-blacklist snd-seq-oss ; : ; }
#
install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; : ; }
# Cause optional modules to be loaded above sound card driver modules
install snd-emu10k1 /sbin/modprobe --ignore-install snd-emu10k1 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-emu10k1-synth ; }
install snd-via82xx /sbin/modprobe --ignore-install snd-via82xx $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq ; }

# Load saa7134-alsa instead of saa7134 (which gets dragged in by it anyway)
install saa7134 /sbin/modprobe --ignore-install saa7134 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist saa7134-alsa ; : ; }
# Prevent abnormal drivers from grabbing index 0
options bt87x index=-2
options cx88_alsa index=-2
options saa7134-alsa index=-2
options snd-atiixp-modem index=-2
options snd-intel8x0m index=-2
options snd-via82xx-modem index=-2
options snd-usb-audio index=-2
options snd-usb-caiaq index=-2
options snd-usb-ua101 index=-2
options snd-usb-us122l index=-2
options snd-usb-usx2y index=-2
# Ubuntu #62691, enable MPU for snd-cmipci
options snd-cmipci mpu_port=0x330 fm_port=0x388
# Keep snd-pcsp from being loaded as first soundcard
options snd-pcsp index=-2
# Keep snd-usb-audio from beeing loaded as first soundcard
options snd-usb-audio index=-2
# Troubleshooting
options snd-hda-intel model=mba6

That is my biggest gripe with modern windows. The OS itself is pretty decent, but WHY am I paying at minimum $100 and seeing ads all over the start menu? Even with a vanilla MS sourced USB there are so many bloat apps. It didn’t used to be that way.

I set up a PC for recording in a sound system and got a fresh install of Windows 11 on a custom PC and it was still super bloated with garbage games and a video editor that watermarks footage instead of the perfectly functional basic software they used to have.

I am in the process of repairing and setting up an old macbook with Linux since it stopped getting Apple updates. When I get a new laptop I will likely go with Linux there as well.

Thank you! I will try that out and read through those pages. I never had sound through speakers or headphones.

I also changed to regular Debian desktop to see if that would fix the issue per the post about someone getting the same model working on plain Debian with no audio issues, but the behavior is the same. The post was a few years old so I’m guessing it’s a version difference.

I will reply back with those outputs when I have a chance to try this. Currently the laptop is kind of unwieldy to use as I accidentally broke the teackpad (or track pad cable) while replacing the keyboard so I’m waiting on parts. External inputs work I just need to clear space to set it up for troubleshooting

I was able to get alsamixer to show the HDMI audio output by adding options snd-hda-intel model=generic to the alsa-base.conf file, but that is all it can see, and that doesn’t utilize the speakers on the laptop.

pacmd list-cards gives this - it looks like it is only the HDMI audio

1 card(s) available.
    index: 0
	name: 
	driver: 
	owner module: 22
	properties:
		alsa.card = "0"
		alsa.card_name = "HDA Intel HDMI"
		alsa.long_card_name = "HDA Intel HDMI at 0xb0a10000 irq 74"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:03.0"
		sysfs.path = "/devices/pci0000:00/0000:00:03.0/sound/card0"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "0a0c"
		device.product.name = "Haswell-ULT HD Audio Controller"
		device.form_factor = "internal"
		device.string = "0"
		device.description = "Built-in Audio"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	profiles:
		output:hdmi-stereo: Digital Stereo (HDMI) Output (priority 5900, available: unknown)
		off: Off (priority 0, available: unknown)
	active profile: 
	sinks:
		alsa_output.pci-0000_00_03.0.hdmi-stereo/#1: Built-in Audio Digital Stereo (HDMI)
	sources:
		alsa_output.pci-0000_00_03.0.hdmi-stereo.monitor/#1: Monitor of Built-in Audio Digital Stereo (HDMI)
	ports:
		hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "video-display"

Thank you! The webcam is working fine now. still can’t figure out the audio but I’ll keep messing with it

I thought so but I’ve only ever used it on taller TPU prints where I want them to basically be hollow so I’ve never seen it look quite like that!

Those look great! What is the top left one?

That’s a good tip - I haven’t tried that yet. I’ll give it a shot next time I need something sturdy

Yeah I do like that it doesn’t jerk the printer, just a little wiggle!