I understand the intent, but feel that there are so many other loopholes that put much worse weapons on the street than a printer. Besides, my prints can barely sustain normal use, much less a bullet being fired from them. I would think that this is more of a risk to the person holding the gun than who it’s pointing at.

    • cynar@lemmy.world
      link
      fedilink
      English
      arrow-up
      12
      ·
      1 year ago

      The reprap movement was exactly that. A self replicating rapid prototyper. While it never reached true replication, it got close enough to cause an explosive growth of the community. That, in turn led to the huge number of low cost suppliers and designs we have now.

    • Captain Aggravated@sh.itjust.works
      link
      fedilink
      English
      arrow-up
      3
      ·
      1 year ago

      As others have said, the RepRap concept was trying to be that. At first the idea was to 3D print as much of the machine as possible, but what it realistically achieved was you would buy metal frame rails, nuts & bolts, the hot end assembly (a glorified hot glue gun), motors, and a controller board (in many cases literally an arduino) and 3D print connectors and bracketry necessary to hold the thing together. Josef Prusa took the “Mendel” pattern Reprap and simplified it into his now ubiquitous upright plate style “Prusa i3” pattern.

      I’ve built several 3D printers from “scratch” and at least 20 from kits. My own 3D printer has printed many of its own parts.